2012Horizontal cup Sublimation Machine

1,high quality and best price 2,factory outlets 3,experienced export 4,best service to you

Bake some machine operation explanation"

• plugged in and turn on the power switch. (the machine rated voltage 220 V rated power input, 350 W)• set operating procedures: (this equipment temperature display for degrees Fahrenheit)Initial temperature: according to the pattern Settings button once, this time set indicator, press addition key or subtraction key set starting temperatures.

The highest temperature: according to the pattern set key for the second time, temperature indicator light at this time, the addition key or subtraction key set the highest temperature.

The highest temperature baking time: according to the pattern set key third, this time the indicator light on time, according to the addition key or subtraction key set the highest temperature bake? A mortar rush huan?

For execution: according to the pattern set key four time, into the machine for execution.

Note: start temperature range 200 ~ 380 degrees set, the high temperature of 200 ~ 430 degrees set.

The most high temperature baking time setting 0 ~ 999 seconds.

This machine is with the temperature setting self locked functions, such as the start temperature is set to 340 degrees, the machine will automatically limit the most high temperature range set from 340 to 430 degrees. Conversely, such as first highest temperature of 250 degrees set, the machine will automatically limit temperature range of setting starting from 200 to 250 degrees.

• roast seal:Slow roast: the required items placed the good decoration, press down the pressure hand, turn on the power switch, the temperature is beginning to rise. When the temperature rise to initial temperature, a short buzzer popping sound, according to the execution button once, until a buzzer long tones, again according to the execution button once, end printing. Remove object, the temperature will be gradually returning to start to temperature, in speed roast standby state.

Speed roast: in the initial temperature condition, placed the good object, press the hand pressure, according to the execution button once, until a buzzer long tones, again according to the execution button once, end printing. Remove object, the temperature will be gradually returning to start to temperature, again in speed roast standby state.

4. Hot stamping design bad problem hint:

A. colour slants light: temperature

B. design fuzzy: time is too long lead to ink spread.

C. design surface dull: pressure or temperature was too high.

D. design local fuzzy: hot stamping area uneven heat distribution.

E. design has scar: hot stamping for too long.

F. design colour differ depth: pressure not divide evenly or object to transfer to coating not divide evenly.

G. sticky paper: the temperature too high or object to transfer to coating is poor.

Parameters recommend: start temperature setting for 230 degrees, the most high temperature set 330 degrees, the most high temperature baking time setting for 30 seconds.

Hot stamping: use flannelette and wipe the mark cup surface, put papers bound bag mark cup, and with high temperature tape paste fixed, put in the hot cup method.the cavity and promote the pressure, such as stress or too small, can adjust the push rod trip.

Note: bake some machine heating pad not afraid empty to burn, but will try to avoid cup body height is far lower than the baked baking cup mat width

Cup, the same also don't just put the cup a small part of the body into baking cup mat baked in, if in a cup

Small baking on design should work on of the processing.

2012Horizontal cup Sublimation Machine